P-180 Cardboard Packet and Carton Packing Line
Application:
P-180 Cardboard Packet and Carton Packing Line is used to pack the cigarettes in length of 84-100mm with different diameters, in different arrangement. It can automatically complete the operations of hinge-lid cardboard packet packing, label tax, wrapping, box and box over wrapping.
This machine has automatic protecting, testing, ejecting and indicating fault functions, and easy operation and convenient maintenance. It is the ideal cigarette hard packing equipment. About the standard of the products, we can make the various according to the customers' requirements.
| Technical Parameters: | |
| Rated Production Capacity | 180 packets / min |
| Cigarette Standard Length | 84mm |
| Circumference | 22±0.3mm |
| Packet Outside Dimension | 87.5×56×23.5mm (Collation 7*6*7) |
| Carton Outside Dimension | 283×88.5×48mm |
| Way of Carton Packing | European Style |
| Power Consumption | 9.92kw |
| Unit Weight | 8150kg |
| Outside Dimension | 8600×6700mm |
| Requirement for the Working Conditions: |
| Ambient Temperature | 25±5°C |
| Relative Humidity | 55-65% |
| Height Above Sea Level | not higher than 2000m |
| The Dust Content of the Air in the Worksite | not more than 3mg/m3 |
| Power Supply | |
| Voltage | 380±38V |
| Frequency | 50HZ |
| Air Supply | |
| Compressed Air Pressure > 0.6 MPa , Flow > 48m3/h |
| Pressure of the Vacuum > 0.05 MPa , Flow > 60m3/h |
1. How About the Installation & Adjustment?
After the equipment arrived at the customer’s site, customers are responsible for unpacking and arranging the equipment in reference to the placement drawing or under our install-adjust technicians’ guidance. Costs of our staffs are decided at last.
2. How about the "Quality Assurance"
We are responsible for the faults and damages of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc.The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer’s factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.
3.How about the Warranty?
We offer 12 months maintenance period to the problems that caused by our design, manufacture, and material quality, and offer the relevant parts and effective services for free if the problems was caused by above reasons. We will offer a life-long technical support, after service for customers.
